Sampling Booth has been designed to provide a Class 100 working environment at rest, with built-in scavenging system to ensure protection for the product, operator and surrounding environment Imported Minipleat HEPA Filter with hot melt technology, which conforms to EU 13 Grade, with an efficiency rating better than 99.99% for 0.3μ at exhaust position Fabtech make prefilter which conforms to EU 4 Grade, with efficiency of 90% down to 10µ. These Filters are basically made from micro-fibre-glass media and are inherently washable Fabtech make Intermediate filter which conforms to EU 7 Grade, with efficiency of 95% down to 3µ. These Filters are basically made from micro-fibre-glass media and are inherently washable Motor Blower provided are statically and dynamically balanced, Supply of sufficient capacity and static pressure is used to take care of airflow requirement for entire life of HEPA. The blower is high-performance, noise abated, light weighted statically and dynamically balanced
Dispensing/Sampling Booth provides a safe, HEPA Filtered environment, for the dispensing of hazardous drug powders. Air is pulled away from user thru rear-wall pre-filters, trapping powders; recirculating air through ceiling mounted high efficiency particulate air (HEPA) filter rated 99.99% efficient at 0.3 microns.) protects the operators from toxic chemicals / raw materials used for manufacturing of tablets, medicines, capsules etc from external contamination during the process of weighing or measuring. It is ideal where a high degree of flexibility is desired. Containment is achieved by air movement. The product also known as Pharmaceutical Sampling Booth and Pharmaceutical Dispensing Booth.
Hectra Enviro Systems offers a wide variety of Sampling Booths. We are the leading Sampling Booth manufacturer for pharmaceuticals in Hyderabad, India.Hectra has an in-house facility that manufactures,supplies and exports Sampling Booths. Our designs have open front containment systems with built-in scavenging arrangement. This unit is designed and made with stainless steel for providing safety to the operator and the surrounding environment.
It draws Powder aerosols away from the operator and the operating environment, protecting products and personnel ensuring 100% cleanliness. These workstations provide clean Class 100 laminar flow air for process protection by using a two-stage filtration process. The room air is first cleaned with an electrostatically charged pre-filter and then further cleaned with a HEPA filter to facilitate a laminar air flows circulation system.
HECTRA is the market leader and manufacturer of sampling booths. We are the manufacturer,supplier,Exporter in Hyderabad ,India. We have state of art facility for the manufacture of sampling and dispensing booths.
- Designed in accordance with WHO-GMP.
- 3-Stage Filtration like Prefilter , Fine Filter , HEPA filter .
- Heavy duty Low noise motor blower assembly .
- Suitable to accommodate to floor & table top for keeping weight machine5. Negative pressure inside the
booth prevents the escape of fine powder from the work area. - Fully integrated system.
- Easy installation & economical.
- Stainless steel AISI 304 structure.
- Dynamic gasket to guarantee the perfect sealing of the filters.
- Down cross is equipped with N°3 fans with AC frequency control.
- Corrosion resistant exterior and interior.
- Sturdy construction
The air forced downwards is extracted at low level into the booth's filtration system where dust particles are contained at each level of filtration prior to being re-circulated back into the booths' air stream. When the Booths is operating under normal conditions air is pulled through the main working chamber to exhaust grills, normally situated in the rear of the Booths, suppressing air-borne dust away from the operators breathing zone.
All Powder Dispensing / Sampling Booths are available in the following materials of construction depending upon customer’s choice.
- G.I. with Powder Coated finish.
- Fully Stainless Steel with satin finish (Gr-304 / Gr-316)
- polycarbonate curtains
- Product Dispensing
- Large scale dispensing & weighing
- Pharma industry
- Dispensing of raw materials
- Chemical industry
Sampling Booth has been designed to provide a Class 100 working environment at rest, with built-in scavenging system to ensure protection for the product, operator and surrounding environment.
The system comprises:
- Imported Minipleat HEPA Filter with hot melt technology, which conforms to EU 13 Grade, with an efficiency rating better than 99.99% for 0.3μ at supply position
- Imported Minipleat HEPA Filter with hot melt technology, which conforms to EU 13 Grade, with an efficiency rating better than 99.99% for 0.3μ at exhaust position
- Fabtech make prefilter which conforms to EU 4 Grade, with efficiency of 90% down to 10µ. These Filters are basically made from micro-fibre-glass media and are inherently washable
- Fabtech make Intermediate filter which conforms to EU 7 Grade, with efficiency of 95% down to 3µ. These Filters are basically made from micro-fibre-glass media and are inherently washable
- Motor Blower provided are statically and dynamically balanced, Supply of sufficient capacity and static pressure is used to take care of airflow requirement for entire life of HEPA. The blower is high-performance, noise abated, light weighted statically and dynamically balanced
- SS 304 Double Walled Side Panels
- Mechanical Differential Pressure Gauge (0mm-25mm: 2 Nos.) to monitor pressure drop across intermediate filter
- Photohelic Differential Pressure Gauge HEPA filter and (0mm-10mm: 1 No.) To monitor pressure drop across PRE Filter with respect to ambient
- Electrical control panel mounted on the side panel of the unit
- Tube Light
- ON/OFF Switches for motor
- 5/15 Amp single-phase switch socket for external equipment
- DOP Test port at upstream of HEPA filter